Material List for Insulated Log Complete Packages

DAYLIGHT BASEMENT EXTERIOR WALLS   ( If Applicable )

  • 2X6 Pressure Treated Sills With 6” Foam Sill Sealer
  • 2X6 K.D. Spruce Plates And Studs
  • 2X10 K.D. Spruce Headers
  • ½” CDX Fir Plywood Sheathing With Typar®  Air Barrier
  • 2X6 #2 Pine Corner Boards  ( False Corners Are Optional )
  • 2X4 #2 Pine Door And Window Trim
  • 2X8 Pine Log Siding
  • R-21 Insulation with 5 1/2" fiberglass

FLOOR ASSEMBLY

  • 2X8 Pressure Treated Sills With 6” Foam Sill Sealer
  • Triple 2X10 K.D. Spruce Girder
  • Concrete Filled Lally Columns
  • 2X10 K.D. Spruce Floor Joists With Double 2X10 K.D. Spruce Box Frame   ( 2X8 on buildings 24’ or narrower )
  • Joist Hangers As Needed
  • 2X10 K.D. Spruce Solid Bridging
  • ¾” T&G Fir Underlayment Plywood Sheathing With Construction Adhesive
  • 2X12 K.D. Spruce Stair Stringers With 2X10 K.D. Spruce Treads
  • Handrail With Brackets

PORCH AND DECK ASSEMBLY

  • Triple 2X8 Pressure Treated Girder On 4X6 Pressure Treated Posts
  • 2X8 Pressure Treated Joists With Double 2X8 Pressure Treated Box Frame
  • Joist Hangers As Needed
  • 2X8 Pressure Treated Nailer With Copper Flashing
  • 5/4 X 6 Pressure Treated Decking
  • 2X4 Pressure Treated Railings With 4X4 Pressure Treated Posts And  2X2 Pressure Treated Balusters
  • Pressure Treated Stair Material

EXTERIOR WALLS

  • 6X8 Kiln Dried D-Shape Pine Logs
  • Sikaflex® Adhesive Sealant, Foam Gasket, Pre-cut Hardwood Splines, And 3/8” X 10” Lag Screws With Washers
  • Pre-mortised Butt And Pass Corners
  • 7X7 Pine Inside Corner Posts  ( If  Applicable )
  • 2X4 K.D. Spruce Window And Door Bucks
  • 2X8 Pine Log Siding For Skirt Board With 15# Felt Paper And Aluminum Flashing (Weather Stop)

SECOND FLOOR:   ( Models With Stick Framed Gables And Dormers )

  • 2X6 K.D. Spruce Plates And Studs
  • 2X10 K.D. Spruce Headers
  • ½” CDX Fir Plywood Sheathing With  Typar®  Air Barrier
  • 2X6 #2 Pine Corner Boards   ( False Corners Are Optional )
  • 2X4 #2 Pine Window Trim 
  • 2X8 Pine Log Siding
  • R-21 Insulation with 5 1/2" fiberglass

INTERIOR WALLS

  • 2X4 K.D. Spruce Plates And Studs
  • 2X6 K.D. Spruce Plates And Studs For Bearing Wall And Plumbing Access Wall
  • 2X10 K.D. Spruce Headers

SECOND FLOOR ASSEMBLY

  • 6X12 Dressed Hemlock Girder  ( If Applicable )
  • 4X10 Dressed Hemlock Joists   ( 4X8 on buildings 24’ or narrower )
  • 4X10 Dressed Hemlock Ties  ( If Applicable )
  • Timber Hangers ( As Required )
  • 2X6 V-Match STK Pine Decking
  • 2X12 K.D. Spruce Stair Stringers
  • SYP Stair Treads With #2 Pine Risers And Skirt Boards
  • 2X6 #2 Pine Railing With 4X4 #2 Pine Posts And Pine Balusters

PORCH GABLES

  • 2X4 K.D. Spruce Plates And Studs
  • 2X8 Pine Log Siding

 

ROOF FRAME ASSEMBLY   ( Varies By Model )


Conventional Rafter System

  • 2X10 K.D. Spruce Rafters With 2X12 K.D. Spruce Ridge Board
  • 2X6 K.D. Spruce Ceiling Joists
  • 2X4 K.D. Spruce Gable Overhangs And Soffit Returns
  • 5/8” CDX Fir Plywood Sheathing
  • For flat ceilings: R-49 Insulation - 3 1/2" R-11 fiberglass and 12" R-38 fiberglass with rafter vent
  • For sloped ceilings: R-38 Insulation - 10 1/4" R-38 fiberglass with rafter vent
  • For sloped ceilings with less than 10/12 pitch: R-51 Insulation-10 1/4" R-38 Fiberglass with rafter vents, covered with a layer of 2" R-13 Foam, 1x3 Pine Strapping, and a layer of 1/2" Gypsum (Thermal Barrier)



Beam Rafter System

  • 4X10 Dressed Hemlock Rafters With 4X14 Dressed Hemlock Ridge Beam  ( 4X8 on buildings 24’ and narrower )
  • 1X V-Match Knotty Pine Ceiling Deck
  • R-39 Insulation - 3 layers of 2" R-13 foam
  • 2X4 K.D. Spruce Strapping With 2X8 K.D. Spruce Border
  • 2X10 #2 Pine Fly Rafters
  • 5/8” CDX Fir Plywood Sheathing



Roof  Truss System

  • Manufactured Roof Trusses
  • 2x4 K.D. Spruce Truss Braces
  • 2X4 K.D. Spruce Gable Overhangs
  • 5/8” CDX Fir Plywood Sheathing
  • R-49 Insulation - 12" R-38 fiberglass and 3 1/2" R-11 fiberglass with rafter vent


Porch Rafter System   ( If Applicable )

  • 2x8 K.D. Spruce Rafters
  • 2X4 K.D. Spruce Ceiling Joists
  • Joist Hangers As Needed
  • 2X4 K.D. Spruce Gable Overhangs And Soffit Returns
  • 5/8” CDX Fir Plywood Sheathing
  • 1X V-Match Knotty Pine Ceiling

ROOF DECK

  • 8” Drip Edge, Flashing, 15 lb. Felt Paper, And Ridge Vent
  • Ice & Watershield At Eaves And Valleys 
  • Limited Lifetime Architectural Roof Shingles

EXTERIOR TRIM    

  • 1X3 Over 1X6 #2 Pine Fascia  ( Conventional Rafter And Truss )
  • 1X6 Over 1X12 #2 Pine Fascia  ( Beam Rafter )
  • 1X4 And 1X8 #2 Pine  Eave Soffit With Soffit Vent Strip, And  1X12 #2 Pine Gable Soffit  ( Conventional Rafter And Truss )
  • 1X V-Match Knotty Pine Soffit  ( Beam Rafter )
  • 5/4 X4 #2 Pine Window And Door Trim
  • 1X V-Match Knotty Pine Porch Ceiling

EXTERIOR DOORS AND WINDOWS

  • Therma-Tru® Steel Insulated Entry Door With Insulated Glass And Lockset
  • Pella® 450  Pro-Line®  Patio Door Unit With Screen And Muntins ( If Applicable )
  • Pella® 450  Pro-Line®  Aluminum Clad Wood Windows  With Screens And Muntins
  • Velux® Roof Window Unit With Screen  ( If Applicable )

WALL INSULATION

  • 2" Foam Insulation
  • 1x4 Pine Strapping ( Air Space )
  • 1/2" Gypsum (Thermal Barrier)
  • 1 x V-Match Knotty Pine Finish

 

INTERIOR FINISH

  • 1X V-Match Knotty Pine On Walls And Ceilings

 

FLOOR COVERING

  • 1X Knotty Pine Flooring With Plugs
  • 5/8” PTS Plywood Underlayment For Tile Flooring Areas
  • ¼” Multi-Ply Underlayment For Vinyl Flooring Areas

 

INTERIOR DOORS

  • 6-Panel Pine Pre-Hung Door Units In Solid Rabbetted Pine Jambs With Hardware
  • Pine Panel Bi-Fold Doors With #2 Pine Jamb Stock

 

INTERIOR TRIM

  • 5/4 X4 #2 Pine Head Trim With 1X4 #2 Pine Sides And Bottom
  • 1X4 #2 Pine Base Board
  • Pine Corner Bead For Outside Corner Trim
  • 1X12 #2 Pine Closet Shelving And 1  5/16” Wood Closet Rod With Shelf  & Rod Brackets And Rod Sockets

CABINETS, VANITIES AND TOPS

  • Kabinart®  Hermitage Oak Kitchen Cabinets With Preformed Laminate Countertop
  • Kabinart®  Hermitage Oak Vanity Cabinet With Palette®  Moulded Top

 

GARAGE   ( If Applicable )

  • 2x4 K.D. Spruce Plates And Studs
  • ½” CDX Fir Plywood Sheathing With Typar Air Barrier
  • 2X6 #2 Pine Corner Boards ( False Corners Are Optional )
  • 2X4 #2 Pine Door And Window Trim
  • 2X8 Pine Log Siding
  • Truss Roof System
  • Holmes® Insulated Overhead Doors

 

MISCELLANEOUS  ITEMS

  • All Nails And Fasteners
  • Outlast™ Q8 Log Oil Preservative Stain
  • Shim Shingles