Material List for Cabin Series

Construction Details





FLOOR SYSTEM

  • 2x6 pressure treated sills
  • (3) 2x8 girders (built up on job)
  • 2x8 floor joist @ 16" O.C. with required hangers
  • 5/8" 4x8 CDX fir plywood floor sheathing

LOG WALLS & GABLES

  • * "Cabin Grade" kiln dried eastern white pine logs
  • All necessary foam gaskets, caulking, dowels and 10" screws
  • Window and door nailers with caulking
  • Log siding and flashing as necessary for skirting

 

CEILING/LOFT SYSTEM

  • 2x8 loft joists @ 16" O.C. or 2x6 ceiling joists @ 16" O.C.
  • 5/8" 4x8 CDX fir plywood loft floor sheathing
  • Loft bearing wall as required

ROOF SYSTEM

  • 2x8 rafters @ 16" O.C. with 2x10 ridge
  • 2x6 ties as required
  • 5/8" 4x8 CDX fir plywood roof sheathing
  • Limited Lifetime architectural roof shingles with felt paper and 8" galv. drip edge
  • Grace® Vycor® ice & water shield in valley

WINDOWS

  • Pella® ProLine® aluminum clad wood windows with low-E insulated glass
  • Pella® full screens

EXTERIOR DOORS

  • Therma-Tru® steel insulated door with insulated glass
  • Schlage® exterior lockset

EXTERIOR TRIM

  • 1x8 or 1x10 pine fascia
  • V-match knotty pine soffit
  • 5/4x4 pine window and door trim

PORCH SYSTEM

  • (2) 2x6 pressure treated box girder
  • 2x6 pressure treated nailer
  • 2x6 pressure treated joists @ 16" O.C. with necessary hangers
  • 4x6 pressure treated posts with 4x8 D4S girder
  • 2x6 porch rafters @ 16" O.C.
  • 5/4x6 pressure treated decking
  • 2x4 ceiling joists @ 16" O.C. with V-match knotty pine ceiling

 

HARDWARE

  • All required nails are provided with the package


* Cabin Grade logs are shorter in length and have slight milling or other imperfections.
Note: Cabin Series kits are intended for recreational use only, and may not meet building codes.
Maine Pine Log Homes reserves the right to update or improve material specifications.
Cabin Series kits are also available as log sided packages.