Material List for Insulated Log Complete Packages

Daylight Basement Exterior Walls ( If Applicable )
•2X6 Pressure Treated Sills With 6” Foam Sill Sealer
•2X6 K.D. Spruce Plates And Studs
•2X10 K.D. Spruce Headers
•½” CDX Fir Plywood Sheathing With Typar®  Air Barrier
•2X6 #2 Pine Corner Boards  ( False Corners Are Optional )
•2X4 #2 Pine Door And Window Trim
•2X8 Pine Log Siding
•R-21 Insulation with 5 1/2″ fiberglass

Floor Assembly
•2X8 Pressure Treated Sills With 6” Foam Sill Sealer
•Triple 2X10 K.D. Spruce Girder
•Concrete Filled Lally Columns
•2X10 K.D. Spruce Floor Joists With Double 2X10 K.D. Spruce Box Frame   ( 2X8 on buildings 24’ or narrower )
•Joist Hangers As Needed
•2X10 K.D. Spruce Solid Bridging
•¾” T&G Fir Underlayment Plywood Sheathing With Construction Adhesive
•2X12 K.D. Spruce Stair Stringers With 2X10 K.D. Spruce Treads
•Handrail With Brackets

Porch & Deck Assembly
•Triple 2X8 Pressure Treated Girder On 4X6 Pressure Treated Posts
•2X8 Pressure Treated Joists With Double 2X8 Pressure Treated Box Frame
•Joist Hangers As Needed
•2X8 Pressure Treated Nailer With Copper Flashing
•5/4 X 6 Pressure Treated Decking
•2X4 Pressure Treated Railings With 4X4 Pressure Treated Posts And  2X2 Pressure Treated Balusters
•Pressure Treated Stair Material

Exterior Walls
•6X8 Kiln Dried D-Shape Pine Logs
Sikaflex® Adhesive Sealant, Foam Gasket, Pre-cut Hardwood Splines, And 3/8” X 10” Lag Screws With Washers
•Pre-mortised Butt And Pass Corners
•7X7 Pine Inside Corner Posts  ( If  Applicable )
•2X4 K.D. Spruce Window And Door Bucks
•2X8 Pine Log Siding For Skirt Board With 15# Felt Paper And Aluminum Flashing (Weather Stop)

Second Floor:  ( Models With Stick Framed Gables And Dormers )
•2X6 K.D. Spruce Plates And Studs
•2X10 K.D. Spruce Headers
•½” CDX Fir Plywood Sheathing With  Typar®  Air Barrier
•2X6 #2 Pine Corner Boards   ( False Corners Are Optional )
•2X4 #2 Pine Window Trim
•2X8 Pine Log Siding
•R-21 Insulation with 5 1/2″ fiberglass

Interior Walls
•2X4 K.D. Spruce Plates And Studs
•2X6 K.D. Spruce Plates And Studs For Bearing Wall And Plumbing Access Wall
•2X10 K.D. Spruce Headers

Second Floor Assembly
•6X12 Dressed Hemlock Girder  ( If Applicable )
•4X10 Dressed Hemlock Joists   ( 4X8 on buildings 24’ or narrower )
•4X10 Dressed Hemlock Ties  ( If Applicable )
•Timber Hangers ( As Required )
•2X6 V-Match STK Pine Decking
•2X12 K.D. Spruce Stair Stringers
•SYP Stair Treads With #2 Pine Risers And Skirt Boards
•2X6 #2 Pine Railing With 4X4 #2 Pine Posts And Pine Balusters

Porch Gables
•2X4 K.D. Spruce Plates And Studs
•2X8 Pine Log Siding

Roof Assembly Frame  ( Varies By Model )
Conventional Rafter System
•2X10 K.D. Spruce Rafters With 2X12 K.D. Spruce Ridge Board
•2X6 K.D. Spruce Ceiling Joists
•2X4 K.D. Spruce Gable Overhangs And Soffit Returns
•5/8” CDX Fir Plywood Sheathing
•For flat ceilings: R-49 Insulation – 3 1/2″ R-11 fiberglass and 12″ R-38 fiberglass with rafter vent
•For sloped ceilings: R-38 Insulation – 10 1/4″ R-38 fiberglass with rafter vent
•For sloped ceilings with less than 10/12 pitch: R-51 Insulation-10 1/4″ R-38 Fiberglass with rafter vents, covered with a layer of 2″ R-13 Foam, 1×3 Pine Strapping, and a layer of 1/2″ Gypsum (Thermal Barrier)

Beam Rafter System
•4X10 Dressed Hemlock Rafters With 4X14 Dressed Hemlock Ridge Beam  ( 4X8 on buildings 24’ and narrower )
•1X V-Match Knotty Pine Ceiling Deck
•R-39 Insulation – 3 layers of 2″ R-13 foam
•2X4 K.D. Spruce Strapping With 2X8 K.D. Spruce Border
•2X10 #2 Pine Fly Rafters
•5/8” CDX Fir Plywood Sheathing

Roof  Truss System
•Manufactured Roof Trusses
•2×4 K.D. Spruce Truss Braces
•2X4 K.D. Spruce Gable Overhangs
•5/8” CDX Fir Plywood Sheathing
•R-49 Insulation – 12″ R-38 fiberglass and 3 1/2″ R-11 fiberglass with rafter vent
Porch Rafter System   ( If Applicable )
•2×8 K.D. Spruce Rafters
•2X4 K.D. Spruce Ceiling Joists
•Joist Hangers As Needed
•2X4 K.D. Spruce Gable Overhangs And Soffit Returns
•5/8” CDX Fir Plywood Sheathing
•1X V-Match Knotty Pine Ceiling
ROOF DECK
•8” Drip Edge, Flashing, 15 lb. Felt Paper, And Ridge Vent
•Ice & Watershield At Eaves And Valleys
•Limited Lifetime Architectural Roof Shingles

Exterior Trim
•1X3 Over 1X6 #2 Pine Fascia  ( Conventional Rafter And Truss )
•1X6 Over 1X12 #2 Pine Fascia  ( Beam Rafter )
•1X4 And 1X8 #2 Pine  Eave Soffit With Soffit Vent Strip, And  1X12 #2 Pine Gable Soffit  ( Conventional Rafter And Truss )
•1X V-Match Knotty Pine Soffit  ( Beam Rafter )
•5/4 X4 #2 Pine Window And Door Trim
•1X V-Match Knotty Pine Porch Ceiling

Exterior Doors & Windows
Therma-Tru® Steel Insulated Entry Door With Insulated Glass And Lockset
Pella® Lifestyle  Patio Door Unit With Screen And Muntins ( If Applicable )
Pella® Lifestyle  Aluminum Clad Wood Windows  With Screens And Muntins
Velux® Roof Window Unit With Screen  ( If Applicable )

Wall Insulation
•2″ Foam Insulation
•1×4 Pine Strapping ( Air Space )
•1/2″ Gypsum (Thermal Barrier)
•1 x V-Match Knotty Pine Finish

Interior Finish
•1X V-Match Knotty Pine On Walls And Ceilings

Floor Covering
•1X Knotty Pine Flooring With Plugs
•5/8” PTS Plywood Underlayment For Tile Flooring Areas
•¼” Multi-Ply Underlayment For Vinyl Flooring Areas

Interior Doors

•6-Panel Pine Pre-Hung Door Units In Solid Rabbetted Pine Jambs With Hardware
•Pine Panel Bi-Fold Doors With #2 Pine Jamb Stock

Interior Trim
•5/4 X4 #2 Pine Head Trim With 1X4 #2 Pine Sides And Bottom
•1X4 #2 Pine Base Board
•Pine Corner Bead For Outside Corner Trim
•1X12 #2 Pine Closet Shelving And 1  5/16” Wood Closet Rod With Shelf  & Rod Brackets And Rod Sockets

Cabinets, Vanities, and Tops
Kabinart®  Hermitage Oak Kitchen Cabinets With Preformed Laminate Countertop
Kabinart®  Hermitage Oak Vanity Cabinet With Palette®  Moulded Top

Garage  ( If Applicable )
•2×4 K.D. Spruce Plates And Studs
•½” CDX Fir Plywood Sheathing With Typar Air Barrier
•2X6 #2 Pine Corner Boards ( False Corners Are Optional )
•2X4 #2 Pine Door And Window Trim
•2X8 Pine Log Siding
•Truss Roof System
Holmes® Insulated Overhead Doors

Miscellaneous Items 
•All Nails And Fasteners
Outlast™ Q8 Log Oil Preservative Stain
•Shim Shingles

 

<< Material List for Log Sided Shell Packages  Material List for Insulated Log Shell Packages >>