•2×6 pressure treated sills
•(3) 2×8 girders (built up on job)
•2×8 floor joist @ 16″ O.C. with required hangers
•5/8″ 4×8 CDX fir plywood floor sheathing
LOG WALLS & GABLES
•* “Cabin Grade” kiln dried eastern white pine logs
•All necessary foam gaskets, caulking, dowels and 10″ screws
•Window and door nailers with caulking
•Log siding and flashing as necessary for skirting
•2×8 loft joists @ 16″ O.C. or 2×6 ceiling joists @ 16″ O.C.
•5/8″ 4×8 CDX fir plywood loft floor sheathing
•Loft bearing wall as required
•2×8 rafters @ 16″ O.C. with 2×10 ridge
•2×6 ties as required
•5/8″ 4×8 CDX fir plywood roof sheathing
•Limited Lifetime architectural roof shingles with felt paper and 8″ galv. drip edge
•Grace® Vycor® ice & water shield in valley
•1×8 or 1×10 pine fascia
•V-match knotty pine soffit
•5/4×4 pine window and door trim
•(2) 2×6 pressure treated box girder
•2×6 pressure treated nailer
•2×6 pressure treated joists @ 16″ O.C. with necessary hangers
•4×6 pressure treated posts with 4×8 D4S girder
•2×6 porch rafters @ 16″ O.C.
•5/4×6 pressure treated decking
•2×4 ceiling joists @ 16″ O.C. with V-match knotty pine ceiling
•All required nails are provided with the package
* Cabin Grade logs are shorter in length and have slight milling or other imperfections.*
Note: Cabin Series kits are intended for recreational use only, and may not meet building codes. Maine Pine Log Homes reserves the right to update or improve material specifications.
Cabin Series kits are also available as log sided packages.